LTE200 APN Update Guide - Rural - accessrgn.net

LTE200 APN Update Guide - Rural - accessrgn.net

Updating your APN without gotW3's consent could lead to reduced speeds until next billing cycle.


1. Connect to the router either wirelessly or with an ethernet cord 

2. Load the browser of your choice and enter 192.168.1.1 in the address bar. 

3. Log in to the User Interface with the Username and Password on the bottom of the router. 

4. Select the "LTE" Tab 

5. Select the drop-down labeled "APN Profile." 

6. Select "User-Defined." 

7. In the box labeled "APN Self-define," enter the Profile Name Ex. ATTB, TMO, VZW 

8. In the box labeled "APN Name," enter the APN, 'accessrgn.net'

9. At the bottom of the box, select "Add" and allow 10 to 15 seconds for this to process. 

10. Select the "Admin" tab at the top of the page.

11. Select "Commit and Reboot" and complete the reboot process. 

12. You have updated the APN. 



    • Related Articles

    • LTE200 APN Update Guide - Rural - broadband

      Updating your APN without gotW3's consent could lead to reduced speeds until the next billing cycle. 1. Connect to the router either wirelessly or with an ethernet cord  2. Load the browser of your choice and enter 192.168.1.1 in the address bar.  3. ...
    • LTE200 Firmware Update Guide - Rural - broadband

      ReadyNet LTE 200 Rural Plan Manual Firmware Update  1. Hard reset the router by holding down the reset button with a paper clip for 15-20 seconds.  2. Download the firmware file. (Attached) and save it somewhere easy to find. EX. "Desktop" or leave ...
    • APN Updates

      Basic Troubleshooting APN Updates APN Update for LTE 520 1. Power the router up and allow 5 minutes for it to start.  2. Connect to the router via Wi-Fi or Ethernet port.  3. Open a web browser  4. Type 192.168.11.1 in the address bar.  5. Log in ...
    • ReadyNet troubleshooting guide

      ReadyNet GotW3 Firmware In order to complete these steps, the user will have to download the Firmware.  Power the router up and allow 5 minutes for it to start.  Connect to the router via Wi-Fi or Ethernet port. Open a web browser Type 192.168.11.1 ...
    • Connecting to Hulu

      Due to hosting our Rural Plan through a VPN, you will need to white-list your IP address with Hulu. To do so, submit the following request to vx-whitelistrequest@hulu.com                                   Provide the email attached to your Hulu ...